UsiSpi Class Reference

#include <ssd1306_spi_usi.h>

Public Member Functions
	UsiSpi (int8_t csPin, int8_t dcPin)
void	begin ()
void	end ()
void	start ()
void	stop ()
void	send (uint8_t data)
void	sendBuffer (const uint8_t *buffer, uint16_t size)
	Sends bytes to SSD1306 device. More...

Detailed Description

Class implements AVR USI spi support via hardware module.

Definition at line 41 of file ssd1306_spi_usi.h.

Constructor & Destructor Documentation

UsiSpi()

UsiSpi::UsiSpi	(	int8_t	csPin,
		int8_t	dcPin
	)

Creates AVR USI spi instance. This interface can be used from command line avrgcc toolchain. It uses standard USI CLK, USI DO, USI DI pins to send data to LCD.

Parameters

csPin	pin to enable chip select signal, or -1 if cs pin is not required.
dcPin	pin to control data/command mode.

Member Function Documentation

begin()

void UsiSpi::begin

(

)

Initializes spi interface

end()

void UsiSpi::end

(

)

Closes spi interface

send()

void UsiSpi::send

(

uint8_t

data

)

Sends byte to SSD1306 device

Parameters

data	- byte to send

sendBuffer()

void UsiSpi::sendBuffer	(	const uint8_t *	buffer,
		uint16_t	size
	)

Sends bytes to SSD1306 device.

Sends bytes to SSD1306 device. This functions gives ~ 30% performance increase than ssd1306_intf.send.

Parameters

buffer	- bytes to send
size	- number of bytes to send

start()

void UsiSpi::start

(

)

Starts communication with SSD1306 display.

stop()

void UsiSpi::stop

(

)

Ends communication with SSD1306 display.

---

The documentation for this class was generated from the following file:

• lcd_hal/avr/ssd1306_spi_usi.h