Skip to content
EEL 3123: Networks & Systems Lab Manual
  • Home
  • Introduction
    • Safety Rules & Operating Procedures
    • Laboratory Safety Information
    • Troubleshooting Hints
  • Experiments
    • #1: DC Measurements
    • #2: Network Analysis Methods
    • #3: AC Measurements
    • #4: First Order Circuits
    • #5: Second Order Circuits
    • #6: Sinusoidal Steady State
    • #7: Transfer Functions
    • #8: Series & Parallel Resonance
    • #9: Frequency Response
  • Appendix
    • I. Standard Resistor Color Code
    • II. List of Available Resistors & Capacitors
    • III. Guidelines to Write a Final Laboratory Report
Site Search

Safety Rules & Operating Procedures

  1. Students are allowed in the laboratory only when the instructor is present.
  2. Be aware of the location of the Emergency Disconnect (red button near the door) to shut off power in an emergency.
  3. Open drinks and food are not allowed near the lab benches.
  4. Report any broken equipment or defective parts to the lab instructor immediately. Do not open, remove the cover, or attempt to repair any equipment.
  5. When the experiment is finished, all equipment, except for computers, must be turned off. Return substitution boxes (resistor boxes or capacitor boxes) to the designated location. Clean up any cables and components on the bench before leaving.
  6. University property must not be taken out of the laboratory.
  7. Do not move equipment from one lab station to another.
  8. Do not tamper with or remove security straps, locks or other security devices.
  9. ANYONE VIOLATING ANY RULES OR REGULATIONS MAY BE DENIED ACCESS TO THESE FACILITIES.

Table of Contents

  • Introduction
    • Safety Rules & Operating Procedures
    • Laboratory Safety Information
    • Troubleshooting Hints
  • Experiments
    • #1: DC Measurements
    • #2: Network Analysis Methods
    • #3: AC Measurements
    • #4: First Order Circuits
    • #5: Second Order Circuits
    • #6: Sinusoidal Steady State
    • #7: Transfer Functions
    • #8: Series & Parallel Resonance
    • #9: Frequency Response
  • Appendix
    • I. Standard Resistor Color Code
    • II. List of Available Resistors & Capacitors
    • III. Guidelines to Write a Final Laboratory Report

About

Lab Manual Authors:
Dr. Parveen Wahid
Ms. Ya Shen
Dr. Chung Yong Chan

Webmasters:
Brandon Cuevas
Garett Goodale

For questions and revision requests, please contact Chung Yong Chan at chungyong.chan@ucf.edu.

Revised August 2018

Theme by Colorlib Powered by WordPress