Skip to main content

Dr. Muhammad Umar Khan

National University of Sciences and Technology (NUST), Pakistan

Thursday, October 17, 2019
4:00PM – 5:00PM – HEC 113

Abstract

Multiple-input multiple-output (MIMO) systems promise high channel capacity and better reliability of communication. They are an important unlying technology in the current 4G/LTE to achieve higher data rates and will remain an enabling technology for the future 5G systems. Antenna is an important component of MIMO systems whose design requires special consideration as it can greatly affect the overall performance of the MIMO system. This talk will first briefly discuss the current approaches to design MIMO antennas that has been the focus in literature lately. The performance parameters to characterize MIMO antenna will be discussed. It will then focus on a new technique to design MIMO antennas with better performance in terms of correlation coefficient. Unlike the conventional approach where port isolation is increased to reduce correlation coefficient, the proposed approach adopts decorrelation of the radiation patterns of individual elements. Two approaches to design practical antennas based on field decorrelation will be presented. In the first technique, the MIMO antenna is designed in a low profile Fabry-Perot (FP) cavity configuration. A phase-gradient partially reflective surface (PRS) is used as a superstrate above the antenna elements which forms the FP cavity and tilt its beams to decorrelate the fields. The effectiveness of the method is demonstrated by designing several antennas with two and four antenna elements in different frequency bands. The technique results in more than 95% reduction in the correlation coefficient value, thus projecting better MIMO performance. The proposed technique can be easily used to design radome enclosed MIMO antennas. The second technique is again based on field decorrelation. However, a new approach to design an all-dielectric device based on transformation electromagnetics is used. The device when used with MIMO antenna tilt its beams to decorrelate the fields. The design approach and its effectiveness will be discussed. Lastly, the limitations of the presentation techniques and the potential of future work based on the current work will be discussed.

Biography

Dr. Muhammad Umar Khan is an Assistant Professor at the Research Institute for Microwave and Millimeter Wave Studies (RIMMS), National University of Sciences and Technology (NUST), Pakistan. He received Ph.D. in Electrical Engineering from King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia in 2015.

His research focus during his doctorate studies was on Microwave and Antenna Systems Design. As part of the Antennas and Microwave Structure Design (AMSD) laboratory at KFUPM, he worked on Electrically Small Antennas and MIMO Antenna Systems. Currently, he is a visiting scholar at the ECE department, UCF.